How to send Email in Delphi?

Today in most of software program it is required to send mail to others with attached data. As some time we need to update clients about their account details, status or any other information through mail. So Delphi provides so many easiest ways to send mail from our Delphi application. I have collected some of ways which are very useful for Delphi developers. In Delphi we don't required any third party components to send mails. We can send mail to single or group of peoples with CC, BCC and attachments. Even we can send HTML mails from Delphi.

So here are the ways...

1. ShellExecute

Sends Email using default mail client software installed on user's system. But it will not work with attachment for every mail client. And you have to use ShellAPI unit in uses list.

ShellExecute(Self.Handle,

             nil,

             'mailto:' +

             'jiten.g.s001@gmail.com' +

             '?Subject=Test Message Subject' +

             '&Body=Test Message Body',

             nil,

             nil,

             SW_NORMAL);

2. Sending through MS-OutLook mail client with attachment

We can use Delphi's OLE technique to send mail with attachment. But this approach requires Ms OutLook must to be installed in user's system. And need to use OleCtrls, ComObj units

procedure TForm1.btnSendMailClick(Sender: TObject);

const

  olMailItem = 0;

var

  Outlook: OLEVariant;

  MailItem: Variant;

  MailInspector : Variant;

  stringlist : TStringList;

begin

 try

   Outlook:=GetActiveOleObject('Outlook.Application') ;

  except

   Outlook:=CreateOleObject('Outlook.Application') ;

  end;

  try

    Stringlist := TStringList.Create;

    MailItem := Outlook.CreateItem(olMailItem) ;

    MailItem.Subject := 'subject here';

    MailItem.Recipients.Add('jiten.g.s001@gmail.com');

    MailItem.CC:='ABC@GMAIL.COM';

    MailItem.Attachments.Add('c:\FILE1.txt');

    Stringlist := TStringList.Create;

    StringList.Add('body here');

    MailItem.Body := StringList.text;

    MailItem.Send;   //SENDS A MAIL WITH OUT OUTLOOK WINDOW. USE "SAVE" FOR DRAFT

{ 

  // TO SHOW OUTLOOK DIALOG. BUT YOU HAVE SET MAILITEM.SEND AS COMMENT 

    MailInspector := MailItem.GetInspector;

    MailInspector.display(FALSE); //true means modal

    MailInspector.Send;

}

  finally

    Outlook := Unassigned;

    StringList.Free;

  end;

end;

3. MAPI (Messaging Application Programming Interface)

Delphi provides Windows API MAPI methods and functions to send mail by using MAPI. But this approach only works if the end user have MAPI complient Email software installed on that system. You also need to add MAPI unit in uses clause.

function SendMAPIEmail(const aTo, aCC, aBCC, aAtts: array of string; const body, subject, SenderName, SenderEmail: string;
  ShowError: Boolean = true): Integer;
var
  SM: TFNMapiSendMail;
  MAPIModule: HModule;
  Msg: MapiMessage;
  lpSender: MapiRecipDesc;
  Recips: array of MapiRecipDesc;
  Att: array of MapiFileDesc;
  p1, p2, p3, LenTo, LenCC, LenBCC, LenAtts: Integer;
  sError: String;
begin
  try
    FillChar(Msg, SizeOf(Msg), 0);
    { get the length of all arrays passed to this function }
    LenTo := length(aTo);
    if Trim(aCC[0]) <> '' then
      LenCC := length(aCC)
    else
      LenCC := 0;
    if Trim(aBCC[0]) <> '' then
      LenBCC := length(aBCC)
    else
      LenBCC := 0;
    if Trim(aAtts[0]) <> '' then
      LenAtts := length(aAtts)
    else
      LenAtts := 0;
    { ... }
    Setlength(Recips, LenTo + LenCC + LenBCC);
    Setlength(Att, LenAtts);
    { to }
    for p1 := 0 to LenTo - 1 do
    begin
      FillChar(Recips[p1], SizeOf(Recips[p1]), 0);
      Recips[p1].ulReserved := 0;
      Recips[p1].ulRecipClass := MAPI_TO;
      { Upgrade }
      Recips[p1].lpszName := pAnsichar(AnsiString(aTo[p1]));
      Recips[p1].lpszAddress := '';
    end;
    { cc }
    for p2 := 0 to LenCC - 1 do
    begin
      FillChar(Recips[p1 + p2], SizeOf(Recips[p1 + p2]), 0);
      Recips[p1 + p2].ulReserved := 0;
      Recips[p1 + p2].ulRecipClass := MAPI_CC;
      { Upgrade }
      Recips[p1 + p2].lpszName := pAnsichar(AnsiString(aCC[p2]));
      Recips[p1 + p2].lpszAddress := '';
    end;
    { bcc }
    for p3 := 0 to LenBCC - 1 do
    begin
      FillChar(Recips[p1 + p2 + p3], SizeOf(Recips[p1 + p2 + p3]), 0);
      Recips[p1 + p2 + p3].ulReserved := 0;
      Recips[p1 + p2 + p3].ulRecipClass := MAPI_BCC;
      { Upgrade }
      Recips[p1 + p2 + p3].lpszName := pAnsichar(AnsiString(aBCC[p3]));
      Recips[p1 + p2 + p3].lpszAddress := '';
    end;
    { atts }
    for p1 := 0 to LenAtts - 1 do
    begin
      FillChar(Att[p1], SizeOf(Att[p1]), 0);
      Att[p1].ulReserved := 0;
      Att[p1].flFlags := 0;
      Att[p1].nPosition := Cardinal($FFFFFFFF);
      { Upgrade }
      Att[p1].lpszPathName := pAnsichar(AnsiString(aAtts[p1]));
      Att[p1].lpszFileName := '';
      Att[p1].lpFileType := nil;
    end;
    { fill the message }
    with Msg do
    begin
      ulReserved := 0;
      if subject <> '' then
        { Upgrade }
        lpszSubject := pAnsichar(AnsiString(subject));
      if body <> '' then
        { Upgrade }
        lpszNoteText := pAnsichar(AnsiString(body));
      if SenderEmail <> '' then
      begin
        lpSender.ulRecipClass := MAPI_ORIG;
        if SenderName = '' then
          lpSender.lpszName := pAnsichar(AnsiString(SenderEmail))
        else
          lpSender.lpszName := pAnsichar(AnsiString(SenderName));
        lpSender.lpszAddress := pAnsichar(AnsiString(SenderEmail));
        lpSender.ulEIDSize := 0;
        lpSender.lpEntryID := nil;
        lpOriginator := @lpSender;
      end
      else
        Msg.lpOriginator := nil;
      Msg.lpszMessageType := nil;
      Msg.lpszDateReceived := nil;
      Msg.lpszConversationID := nil;
      Msg.flFlags := 0;
      Msg.nRecipCount := LenTo + LenCC + LenBCC;
      Msg.lpRecips := @Recips[0];
      Msg.nFileCount := LenAtts;
      Msg.lpFiles := @Att[0];
    end;
    MAPIModule := LoadLibrary(PWideChar(MAPIDLL));
    if MAPIModule = 0 then
      Result := -1
    else
      try
        @SM := GetProcAddress(MAPIModule, 'MAPISendMail');
        if @SM <> nil then
        begin
          Result := SM(0, application.Handle, Msg, { MAPI_DIALOG or } MAPI_LOGON_UI, 0);
        end
        else
          Result := 1;
      finally
        FreeLibrary(MAPIModule);
      end;
    if Result <> SUCCESS_SUCCESS then
    begin
      case Result of
        MAPI_E_ACCESS_DENIED:
          sError := 'Access denied.';
        MAPI_E_AMBIGUOUS_RECIPIENT:
          sError := 'Ambiguous recipient.';
        MAPI_E_ATTACHMENT_NOT_FOUND:
          sError := 'Attachment not found.';
        MAPI_E_ATTACHMENT_OPEN_FAILURE:
          sError := 'Attachment open failure.';
        MAPI_E_ATTACHMENT_WRITE_FAILURE:
          sError := 'Attachment write failure.';
        MAPI_E_BAD_RECIPTYPE:
          sError := 'Bad recipient type.';
        MAPI_E_DISK_FULL:
          sError := 'Disk full.';
        MAPI_E_FAILURE:
          sError := 'Failure';
        MAPI_E_INSUFFICIENT_MEMORY:
          sError := 'Insufficient Memory.';
        MAPI_E_INVALID_EDITFIELDS:
          sError := 'Invalid Editfields.';
        MAPI_E_INVALID_MESSAGE:
          sError := 'Invalid message.';
        MAPI_E_INVALID_RECIPS:
          sError := 'Invalid recipients.';
        MAPI_E_INVALID_SESSION:
          sError := 'Invalid session.';
        MAPI_E_LOGIN_FAILURE:
          sError := 'Login failure.';
        MAPI_E_MESSAGE_IN_USE:
          sError := 'Message in use.';
        MAPI_E_NETWORK_FAILURE:
          sError := 'Network failure.';
        MAPI_E_NO_MESSAGES:
          sError := 'No messages.';
        MAPI_E_NOT_SUPPORTED:
          sError := 'Not supported.';
        MAPI_E_TEXT_TOO_LARGE:
          sError := 'Text too large.';
        MAPI_E_TOO_MANY_FILES:
          sError := 'Too many files.';
        MAPI_E_TOO_MANY_RECIPIENTS:
          sError := 'Too many recipients.';
        MAPI_E_TOO_MANY_SESSIONS:
          sError := 'Too many sessions.';
        MAPI_E_TYPE_NOT_SUPPORTED:
          sError := 'Type not supported.';
        MAPI_E_UNKNOWN_RECIPIENT:
          sError := 'Unknown Recipient';
        MAPI_E_USER_ABORT:
          sError := 'User Aborted';
      end;
      if sError <> '' then
      begin
        MessageDlg('Could not send email.  ' + sError, mtInformation, [mbOk], 0);
  Exit;
      end;
    end;
  finally
  end;
end;

4. Using INDY components (TIDSMTP, TIdMessage)

Delphi provides indy component TIDSMTP to send emails from our application. We just need to put these components on our form and need to set some properties. You can find this component in Indy Clients tab and Indy Misc tab of component palate.

TIDSMTP - component is used to connect and communicate with a SMTP server

TIDMessage - component is used to store and encode Email message details like body, to, cc, bcc, and attachments.

In this example I have used GMAIL SMTP server to send mails. So please change host name to different when required.

Put following Indy components on your form. Then all the setting are done at runtime on Send button click.

    IdSMTP1: TIdSMTP;
    IdMessage1: TIdMessage;
    IdSSLIOHandlerSocketOpenSSL1: TIdSSLIOHandlerSocketOpenSSL; // to allow SSL authenticate //
.
.
// add following units to Uses clause //
Uses
  IdEMailAddress, IdGlobal, IdAttachmentFile;    

.
.

procedure TFormEmail.btnSendEmailClick(Sender: TObject);
var
  Attachmentfile: TIdAttachmentFile;
begin
// IO HANDLER SETTINGS //
  With IdSSLIOHandlerSocketOpenSSL1 do
  begin
    Destination := 'smtp.gmail.com:587';
    Host := 'smtp.gmail.com';
    MaxLineAction := maException;
    Port := 587;
    SSLOptions.Method := sslvTLSv1;
    SSLOptions.Mode := sslmUnassigned;
    SSLOptions.VerifyMode := [];
    SSLOptions.VerifyDepth := 0;
  end;

//SETTING SMTP COMPONENT DATA //
  IdSMTP1.Host := 'smtp.gmail.com';
  IdSMTP1.Port := 587;
  IdSMTP1.Username := yourGmailaddress@gmail.com; // please change to your gmail address //
  IdSMTP1.Password := 'yourGmailPassword';
  IdSMTP1.IOHandler := IdSSLIOHandlerSocketOpenSSL1;
  IdSMTP1.AuthType := satDefault;
  IdSMTP1.UseTLS := utUseExplicitTLS;

// SETTING email MESSAGE DATA //
  IdMessage1.Clear;
// add recipient list //
  with IdMessage1.Recipients.Add do
  begin
    Name := 'Recipient 1';
    Address := Recipient1@email.com; // please change email address as required //
  end;
// add CC list //
  with IdMessage1.CCList.Add do
  begin
    Name := 'CC Recipient 1';
    Address := CCRecipient1@email.com; // please change email address as required //
  end;
//add BCC list //
  with IdMessage1.BCCList.Add do
  begin
    Name := 'BCC Recipient 1';
    Address := BCCRecipient1@email.com; // please change email address as required //
  end;
//add Attachment to mail //
  Attachmentfile := TIdAttachmentFile.Create(IdMessage1.MessageParts,'C:\File1.txt');

  IdMessage1.From.Address :=  yourGmailaddress@gmail.com; // please change to your gmail address //;
  IdMessage1.Subject := 'Test Email Subject';
  IdMessage1.Body := 'Test Email Body';
  IdMessage1.Priority := mpHigh;

  TRY
    IdSMTP1.Connect();

    IdSMTP1.Send(IdMessage1);
    ShowMessage('Email sent');

    IdSMTP1.Disconnect();
  except on e:Exception do
    begin
      ShowMessage(e.Message);
      IdSMTP1.Disconnect();
    end;
  END;
  AttachmentFile.Free;
end;